Grass Valley 8920ADT - Manual (Page 20)

14 8920ADT Instruction Manual
8920ADT Analog Audio to AES/EBU Converter with Delay Tracking
Remote Configuration and Monitoring
8920ADT configuration and monitoring can be performed remotely using
the 8900NET interface (version 2.1 or later) in 8900TF or TFN frames (see
Figure 6 ). This section describes the GUI access to the module configura-
tion functions. Refer to the 8900NET Network Interface Module Instruction
Manual for information on setting up and operating the 8900 frame net-
work.
For remote access, make sure jumper block JP7 on the module is set for both
Local and Remote access (
Figure 5 ).
Note The physical appearance of the menu displays shown in this manual repre-
sent the use of a particular platform, browser and version of 8900NET
module software. They are provided for reference only. Displays will differ
depending on the type of platform and browser you are using and the version
of the 8900NET software installed in your system.
The 8900 modules can be addressed by clicking on a specific module icon
in the frame status display or on a module name or slot number in the link
list on the left.
Figure 6. 8900NET GUI
The Links section lists the frame and its current modules. The selected link's Status
page is first displayed and the sub-list of links for the selection is opened. The sub-list
allows you to select a particular information page for the selected device.
Content display section displays the information page
for the selected frame or module (frame slot icons are also
active links).