Grass Valley 8920ADT User Manual
Page 27
8920ADT Instruction Manual
21
Configuration
User Settings
The User Settings menu allows you select the following parameters shown
in
■
Get Factory Defaults for:
■
Audio gain (left and right) — 4 dB,
■
Delay — 0.0,
■
Monitor Audio Inputs — Disabled, and
■
Control Action — Independent.
■
Save/Recall User Settings including:
■
Audio gain (left and right), and
■
Delay.
■
Enable/disable Monitor Audio Inputs.
When enabled, the module Status page will indicate if input signals are
present and provide a warning when they are not detected. When dis-
abled the Status page shows a gray input signal arrow indicating the
input status is not monitored.
Note
Operation Mode is not saved or recalled as factory default or user settings.
Operation Mode must always be changed using the on-board rotary switch
or the Control and Status page.
Figure 12. 8920ADT User Settings Display
Use
This
Link