Grass Valley 8947RDA-D - Manual (Page 53)

8947RDA-D/-FR — Instruction Manual 53
Specifications
Specifications
Specifications for the 8947RDA modules are given in Table 7 . Refer to
Table 8 on page 54 for Transmitter SFP device specifications and Table 9 on
page 54 for Receiver SFP device specifications.
Table 7. 8947RDA Specifications
Parameter Value
Coax Input
Number and type of inputs Up to 2 BNCs for 8947RDA-D, 1 BNC for 8947RDA-FR
Input impedance 75 Ohm
Input signal type Serial digital component conforming to the following formats:
• SMPTE 292M
• SMPTE 259M (143 Mb/s, 177 Mb/s, 270 Mb/s), 360 Mb/s)
• SMPTE 344M (540 Mb/s)
• DVB-ASI
Input Signal Type (auto-equalizing
only) 4 Mb/s to 1.5 Gb/s with PN20 pseudonoise sequence, maximum ratio of 19/1
Signal level SDI 800 mV p-p ±10% max
Return loss >10 dB (0.004 to 1.50 GHz)
Equalization Auto equalizing:
HD signals up to 125m of Belden 1694A
SD signals up to 330m of Belden 1694A
Tolerated input jitter Compliant with SMPTE 259M, SMPTE 292M, SMPTE 344M, and DVB-ASI
standards
Coax Outputs
Number and type of outputs 8 BNCs
Output impedance 75 Ohm
Signal type Serial digital component conforming to the following formats:
• SMPTE 292M
• SMPTE 259M (143 Mb/s, 177 Mb/s, 270 Mb/s), 360 Mb/s)
• SMPTE 344M (540 Mb/s)
• DVB-ASI
Signal level SDI 800 mV p-p ±10%
Return loss >15 dB (0.004 to to 1.5 GHz)
Signal Polarity Non-inverted
Tolerated Output jitter For input with < 0.1 UI jitter, the output jitter complies with the SMPTE 292M,
SMPTE 259M , SMPTE 344M, and ASI standards
Power
Maximum Input power 4.1 W
Mechanical
Frame type GeckoFlex
Number of slots Single slot
Rear module type
8947RDA-D 8900WE-R
8947RDA-FR 8900WFR-R