Grass Valley 8964DEC v.1.0.5 - Manual (Page 24)

24 8964DEC/-FS Instruction Manual
Configuration
Table 7. Local Rotary and Paddle Switch Functions
Function
Switch
Setting
Paddle
Switch Up
Paddle
Switch Down
Function Description OSD Text Summary
Bank 1 (2ND LED off)
Adjust individual channels for input video path and video processing.
Bank 1 (2ND LED off)
0 – – Default position for normal operation (parked)
Ch#, Channel Name 1:0 (bank/#)
Model #
HW ver x.x SW ver x.x
FW: xx SN: xxxxxxxxxx
1 On Off Turn OSD (on screen display) on or off
Ch#, Channel Name 1:1
Video: rate or NO Ref: rate or NO
On Screen Disp: (current state)
Choices or scroll bar
2 Yes No Remove setup in composite input video 1:2 Remove Setup (525 only)
3 On Off Turn AGC (Auto Gain Control) on or off 1:3 AGC
4 Increase Decrease Adjust input video gain (% relative to 1 V p-p) 1:4 Input Video Gain
5 Increase Decrease Adjust input chroma gain 1:5 Input Chroma Gain
6 Increase Decrease Adjust contrast/Y gain 1:6 Contrast/Y Gain
7 Increase Decrease Adjust brightness/Y offset 1:7 Bright/Y Offset
8 Increase Decrease Adjust saturation/chroma gain 1:8 Sat/Chroma Gain
9 Increase Decrease Adjust hue/chroma phase 1:9 Hue/Chroma Phase
A Comb Notch Select decoding mode 1:A Decoding mode
B Adaptive Fixed In Comb mode, select type of filtering 1:B Comb Type
C On Off Turn Global Chroma Kill on or off 1:C Chroma Kill
D On Off Turn output test signal generator on or off 1:D Vid Proc
E Bars Pathological When test signal on, select signal type 1:E Test Sig
F – Recall Recall factory defaults 1:F Factory Default
Bank 2 (2ND LED on)
Bank 2 (2ND LED on)
0 – – Default position for normal operation (parked). 2:0 (parked position information)
1 None 21/284 or 24/337
Select P_Active lines to reserve for data (525
or625). See
Table 4 on page 14 .
2:1 Rsv For Data
2 22/285 or 25/338 23/286 or 26/339 2:2 Rsv For Data
3 24/287 or 27/340 28/341 (625 only) 2:3 Rsv For Data
4 On Off Turn VBI Chroma Kill on or off (all VBI lines). 2:4 VBI Chroma Kill
5 On Off Turn VBI blanking on or off (all VBI lines). 2:5 VBI Blanking
6 Pass Thr Notch Select VBI decoding mode (all VBI lines). 2:6 VBI mode
7 Yes No Remove VBI setup (525 only). 2:7 Remove VBI Setup
8 >2s Learn Recall
Hold paddle for more than 2 seconds to learn
current channel settings into E-MEM register.
select down to Recall.
2:8 EMEM
9 On Off Turn ACC (Auto Chroma Control) on or off 2:9 ACC
A On Off Turn Monochrome In on or off 2:A Monochrome In
B-E – – Not used
F Increase Decrease Adjust horizontal timing 2:F Horizontal Timing