Grass Valley 8964DEC v.1.0.5 - Manual (Page 33)

8964DEC/-FS Instruction Manual 33
Configuration
Module Configuration Web Pages
Module configuration is provided for the following functions with the GUI
interface:
• Video Composite In ( page 34 )
• Video Processing ( page 36 )
• VBI ( page 38 )
• Timing ( page 40 )
• Picture Enhancer ( page 42 )
Read-only information about the module is given on the top of each web
page including model name and description, frame and slot location and
last E-MEM register recalled.
When a channel is selected to configure, the input name (as defined on the
I/O Config web page) will be displayed under the selected channel or will
show the default name in bold type. Each channel will show the signal ref-
erence type (NTSC or PAL).
After making a change, click on Apply to activate settings in each selection
then click on the Refresh button at the top of the display to see the changes.
Each of the four decoder channels can be adjusted separately or settings
can be applied to other or all channels. Use the
Apply Setting To ( Channel 1, 2,
3 or 4 as applicable) or All buttons to apply the same values to the other
channels selected or all channels.
To reset the current channel or all channels to factory defaults, select the
Reset defaults for
Current Channel or All Channels buttons.
Select the Back , Functional View , or Next link to navigate to the next function or
use the links on the left of the web page.