Equinox Systems ZyAIR G-200 - Manual (Page 15)

ZyAIR G-200 User’s Guide
Getting Started 1-1
Chapter 1
Getting Started
This chapter prepares you to using the ZyAIR Utility.
1.1 ZyAIR Hardware and Utility Installation
Follow the instructions in the Quick Installation Guide to install the ZyAIR Utility and driver and
make hardware connections.
1.2 Disable Windows XP Wireless LAN Configuration Tool
Windows XP includes a configuration tool for wireless LAN devices.
DO NOT use the Windows XP configuration tool and the
ZyAIR Utility at the same time. It is recommended you use the
ZyAIR Utility to configure the ZyAIR.
There are two methods to disable the configuration tool in Windows XP after you install the
ZyAIR Utility.
From ZyAIR Utility
Right-click on the ZyAIR Utility system tray icon and click Turn off zero configuration.
Figure 1-1 Windows XP: System Tray Icon
From the Wireless Network Connection Status Screen
1. Double-click on the network icon for the wireless connection in the system tray. If the icon is not
present, proceed to Step 2. Otherwise skip to Step 5.
Figure 1-2 Windows XP: System Tray Icon
2. If the icon for the wireless network connection is not in the system tray, click Start, Control
Panel and double-click on Network Connections.