Equinox Systems ZyAIR G-200 - Manual (Page 37)

ZyAIR G-200 User’s Guide
Maintenance 3-1
Chapter 3
Maintenance
This chapter describes how to uninstall or upgrade the ZyAIR Utility.
3.1 Removing the ZyAIR Utility
Follow the steps below to remove (or uninstall) the ZyAIR Utility from your computer.
1. Click Start, Programs, ZyAIR G-200 Wireless LAN USB Adapter, Uninstall.
2. A Confirm Uninstallation window displays. Click OK to remove the driver and the
utility software.
Figure 3-1 Confirm Uninstallation
3. Restart your computer when prompted.
3.2 Upgrading the ZyAIR Utility
To perform the upgrade, follow the steps below.
1. Download the latest version of the utility from the ZyXEL web site and save the file on
your computer.
2. Follow the steps in the Removing the ZyAIR Utility section to remove the current ZyAIR
Utility from your computer.
3. Restart the computer when prompted.
4. After restarting, refer to the procedure in the Quick Installation Guide to install the new
utility software.
5. Check the version numbers in the About screen to make sure the new utility is installed
properly.
3.3 Disconnecting the ZyAIR
To avoid losing data, DO NOT disconnect the ZyAIR while
data transmission is taking place.
After you exit from the ZyAIR Utility program, you may disconnect the ZyAIR from your
computer.
You do not have to turn off the computer before removing the ZyAIR - you can insert or remove
the ZyAIR while the computer is turned on. However, it is recommended that you stop the
operation of the ZyAIR first.
Follow the steps below to disable the ZyAIR in Windows. Screen shots may vary depending on
the version of Windows.
1. Close and exit the ZyAIR Utility.