Figure 1 – Grass Valley 8990ARC v.1.0 User Manual
Page 9
8990ARC Instruction Manual
3
Installation
Figure 1. 8900 Series Frame
8900 modules are interchangeable within the module cells. There are 10
BNC connectors in each cell’s I/O group. The functional assignment of
each connector in a group is determined by the module that is placed in
that cell. The maximum number of modules an 8900 frame can accept is
ten.
illustrates the rear connector plate for an 8900 Series frame.
Figure 2. 8900 Series Frame Rear Connectors
Note
At the back of this manual (hard-copy only) are die-cut overlay cards that can
be placed over the rear connector BNCs to identify the specific 8990ARC con-
nector functions.
To install a module in the frame:
1.
Insert the module, connector end first, with the component side of the
module facing to the right and the ejector tab to the top.
2.
Verify that the module connector seats properly against the backplane.
3.
Press the ejector tab in to seat the module in place.
Frame Monitor or
Network Interace Module
Any 8900 Module
Power
Supplies
(only)
8036-03
J1
J2
J3
J4
J5
J6
J7
J8
J9 J10
IN
1
J2
J4
J6
J8
J1
J2
J3
J4
J5
J6
J7
J8
J9 J10
IN
3
J1
J2
J3
J4
J5
J6
J7
J8
J9 J10
IN
5
J1
J2
J3
J4
J5
J6
J7
J8
J9 J10
IN
2
J1
J2
J3
J4
J5
J6
J7
J8
J9 J10
IN
7
J1
J2
J3
J4
J5
J6
J7
J8
J9 J10
IN
9
J1
J2
J3
J4
J5
J6
J7
J8
J9 J10
IN
4
J2
J4
J6
J8
J1
J2
J3
J4
J5
J6
J7
J8
J9 J10
IN
6
J2
J4
J6
J8
J1
J2
J3
J4
J5
J6
J7
J8
J9 J10
IN
8
J2
J4
J6
J8
J1
J2
J3
J4
J5
J6
J7
J8
J9 J10
IN
10
O
U
T
O
U
T
O
U
T
O
U
T
O
U
T
O
U
T
O
U
T
O
U
T
O
U
T
O
U
T
8036-03