Grass Valley Apex v.2.0 - Manual (Page 60)

62 APEX — Installation and Service Manual
Section 2 — Planning Guide
Specifications
75 Ohm Version
AES–3id–1995 coaxial transmission of AES signals
SMPTE 276M for coaxial transmission of AES signals
AES–11–1997 synchronization standard (in development)
Inputs
Input connector: 75 Ohm BNC unbalanced (50 Ohm compatible)
Input Sample Rate: 30 to 100 kHz
Outputs
Output connector: 75 Ohm BNC unbalanced (50 Ohm compatible)
Output impedance: 75 Ohm
Output sample rate: 30 to 100 kHz (sync/async)
110 Ohm Version
AES–3–1992 with the exception of 75 Ohm coaxial I/O
AES–11–1997 synchronization standard (in development)
Inputs
Input connector: 25-pin D female
Input impedance: typical 110 Ohm,
+/-20%, at frequencies from 100 kHz to 12 MHz
Input sample rate: 30 to 100 kHz
Outputs
Output connector: 25-pin D female
Output impedance: typical 110 Ohm
+/-20%, at frequencies from 100 kHz to 12 MHz
Output sample rate: 30 to 100 kHz (sync/async)
MADI
AES–10
Inputs
Input connector: 75 Ohm BNC unbalanced (50 Ohm compatible)
Outputs
Output connector: 75 Ohm BNC unbalanced (50 Ohm compatible)