Grass Valley iTX Master Control v.2.6 - Manual (Page 16)

12
iTX-MC System Configuration
Configuring the Master Control Plugin in the iTX Desktop
Fig. 2-1: Manage Views pop-up layout in the iTX Desktop.
6 In the Folders pane, select the System>Templates>1920x1080 folder.
7 In the Layouts pane, select the iTX MC Layout Global layouts and click the <<Add
button.
ITX MC (Global Layout) is now displayed in the Layouts in View pane.
8 Click OK and the iTX MC tab is added to the iTX Desktop’s Layout Selection Bar. When
the iTX MC tab is selected, the iTX MC layout appears featuring the Mixer Mapper
component.
Configuring the Master Control Plugin in the iTX Desktop
The iTX Desktop’s Master Control Plugin allows you to add master control primary and/or
secondary events to a schedule. See iTX Master Control Events , on page 4 for a description
of master control events.
A valid iTX Master Control license must be installed on the iTX system for the Master
Control plugin to be visible and operational. Also, the Master Control Plugin must be
configured on a per channel basis.
To configure the Master Control plugin:
1 Open the iTX Desktop’s Engineering View and select the Channel Config tab.
2 Select the channel and then the Plugins tab.
3 Select the Master Control tab and the following Master Control Setup settings become
available.