Grass Valley iTX Ingest Appliance v.2.3 - Manual (Page 20)

8
Installation and Setup Instructions
Unpacking and verifying the shipment contents
Unpacking and verifying the shipment contents
The iTX Ingest Appliance is packaged and shipped with the items listed below. As you
unpack the contents of the shipment, please verify the completeness and condition of the
contents of your received shipment.
We also recommend that before attempting to install the unit, you familiarize yourself with
each of the items related to the iTX Ingest Appliance, including the front and rear
components of the chassis (see
Overview of the front panel components , on page 3 and
Overview of the rear panel components , on page 5).
• iTX Ingest Appliance chassis
• A 1 RU server which is factory configured as a playout server using iTX Output
Server software.
• Rack mounting kit
• 2 x chassis rail assemblies (inner & outer rails)
• Rail brackets, screws & washer kit
• AC power cables
• Two (2) power cables are provided, which connect to the iTX Ingest Appliance’s
power supplies.
• License Dongle
• The license dongle authenticates the iTX software and allows you to use the
software once the license is registered in the iTX system.
• System Recovery DVD package
• These DVDs can be used to restore the iTX Ingest Appliance to its original factory
default configuration.
• Store these the System Recovery DVDs in a safe location. Do not misplace.
Note: If any damage occurred during transport or if any items are
missing from the package, please contact Grass Valley Technical Support .
Mounting the iTX Ingest Appliance chassis in a rack
Included in the shipping package is a rack mounting kit, which contains the rail assemblies
and screws required to mount the iTX Ingest Appliance chassis into an equipment rack.
Note that the rails are designed to fit in racks with a depth of 26” to 33.5”. Due to the heavy
weigh of the unit, the rack in which the iTX Ingest Appliance will be installed should be
anchored to the building’s structure.
WARNING
iTX Ingest Appliances are intended to be installed in a restricted access
location by qualified personnel. All health and safety regulations and
precautions must be observed.
Included in the shipping package are a pair of rail assemblies. Each rail assembly consists of
two sections: an inner fixed chassis rail that secures directly to the server chassis and an
outer fixed rack rail that secures directly to the rack itself.