Grass Valley Jupiter v.1.0.0 - Manual (Page 41)

Jupiter AccuSwitch Soft Panels and Visual Status Display Instruction Manual 33
Sequence Operations
Note Entries to Local Sequences can also be made by selecting an entry in the
Sequence List and then right clicking. The options are “Insert Entry Above”
the selected item or to “Insert Entry Below” the selected item.
Figure 37. Save Changes Dialog
2. Enter a name to identify the sequence in the Sequence Name field.
3. Select the destination from the Destination drop-down list. In the
example below, (
Figure 38 ) the “ACR9-53” destination has been
selected.
Figure 38. Destination Drop-Down List
4. Select the All Levels button if you would like all levels to use the same
source. In this example below, ( Figure 39 ) “All Levels” was turned off.
The second level can now be selected.
Note All Levels are selected by default. Selecting the All Levels button makes each
individual level accessible for a breakaway switch in the sequence.
Figure 39. The All Levels Button -Turned Off
5. Select a source for each level.
Note The “white arrow” on the source drop-down list, shows that a source can be
selected. If a source cannot be selected the “arrow” will be grayed out. See
Figure 40 .
Figure 40. Source Selection Options
6. Click the Save button to retain the selected information for future use.
Both Levels
can be selected