Grass Valley K2 Dyno PA v.2.0 - Manual (Page 47)

Playing an asset or playlist
Prerequisite:
• You must have a managed channel added to the Dyno PA client before you can
play an asset or playlist.
You can play a K2 Dyno PA asset or playlist on a K2 system by using the Managed
Channel pane.
1. In the Asset List pane, right-click on the asset or playlist and select Load To .
The managed channels that have been added to this Dyno PA client are displayed.
2. Select the managed channel that you want to play the asset on.
In the Managed Channels pane, under the row for the selected managed channel,
the name of the asset or playlist is displayed under Primary or Secondary asset
column.
NOTE: If the managed channel is recording while you are trying to load an
asset or playlist, a warning message is displayed.
3. In the row for that channel, click the Play button.
On the K2 system, the asset or playlist begins playing. The timecode value is
updated as the play proceeds.
4. To play the asset or playlist in loopback mode, right-click on the channel and select
Loop Playback .
If you right-click on the channel, the Loop Playback setting is checked.
NOTE: If you put a channel in Loop Playback mode, it remains in Loop
Playback mode after you eject the asset or playlist.
5. To move backward through the asset or playlist to the beginning, rewind, stop,
fast-forward or record, use the transport controls for that channel.
6. To eject the asset or playlist, right-click on the channel and select Eject .
The asset or playlist is ejected; its name disappears from the asset column.
Renaming an asset
1. Right-click on the asset in the Asset List pane, and select Rename .
A text field displays next to the Rename command.
2. Highlight the default name, type in the new name, and hit Enter .
The asset is renamed.
13 June 2011 Dyno Production Assistant User Manual 47
Working with assets, bins, and folders