Grass Valley K2 Dyno S Quick Start v.3.0 - Manual (Page 18)

Chapter 2 Dyno S Controller operation Live replay
K2 Dyno S Replay System 18 Quick Start Guide
4 December 2012
Live replay
You can use the Dyno S panel to directly control playback of recently recorded material.
1. Press Live/Local to start Live mode (button lights red).
2. Pressing the Stop (square) and Play (triangle) buttons stops and starts playback. The
Live/Local button lights white. When Play is pressed it lights green. Material
continues to be recorded as the live playback is started and stopped.
3. Moving the T-Bar permits playback speed control. When the T-Bar is moved the
Live/Local button goes white.
• Holding down Fn before moving the T-Bar permits lever adjustment without
changing playback speed, to allow moving the bar to a limit to realign speed
control.
4. Turning the Jog Knob permits scrubbing (forward and backwards playback). The
Live/Local button lights white, and the Play button turns off.
1 2
3 4
8681_07