Electrolux EWN 14780 W User Manual
Page 16
16 electrolux use
The availability of these soil level icons
change according to the type of fabric
as shown in the following chart:
Altering an option or a running
programme
It is possible to change any option
before the programme carries it out.
Before you make any change, you
must pause the washing machine by
pressing the Start/Pause button.
(Only the Time Manager
option
cannot be modified after the
programme has started. )
Changing a running programme is
possible only by resetting it. Turn the
programme selector dial to O and then
to the new programme position. The
washing water in the tub will not
emptied out. Start the new programme
by depressing the Start/Pause button
again.
Interrupting a programme
Depress the Start/Pause button to
interrupt a programme which is
running, the corresponding light starts
to flash. Depress the button again to
restart the programme.
Cancelling a programme
Turn the selector dial to O to cancel a
programme which is running. Now you
can select a new programme.
Opening the door after the
programme has started
First set the machine to pause by
pressing the Start/Pause button.
If the “door”
icon desappears on
the display, the door can be opened.
If the “door”
light does not goes
off, this means that the machine is
already heating, that the water level is
above the bottom edge of the door or
that the drum is turning. In this case
the door can not be opened.
If you cannot open the door but you
need to open it you have to switch the
machine off by turning the selector dial
to O.
After about 3 minutes the door can be
opened (pay attention to the water
level and temperature!).
Fabric
Soil Level
Cottons
90°C
X
X
X
X
X
X
60°C
X
X
X
X
X
X
40°C
X
X
X
X
X
X
50°C
X
X
X
X
X
X
30°C
X
X
X
X
X
X
(cold)
X
X
X
X
X
X
Synthetics
Delicates
60°C
X
X
X
X
50°C
X
X
X
X
40°C
X
X
X
X
40°C
X
X
X
X
30°C
X
X
X
X
30°C
X
X
X
X
(cold)
X
X
X
X
(cold)
X
X
X
X
132972160 EN.qxd 30/03/2007 15.42 Pagina 16