Ericsson 230 - Manual (Page 67)

Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
66 Extra features
Remaining budget
You can easily check the remaining budget of your handset. The amount
depends on the budget type and, if a cost budget is selected, whether metering
pulses have been received during an external call. The amount can show a
negative value which means that the budget has been exceeded and no more
external calls can be made with your handset.
To see the remaining budget:
Route: BaseStation » Information » CallBudget
1. Select CallBudget and press Y E S .
One the following is displayed:
• No Budget if no budget is assigned to your handset.
• Remain Time and a value in hours and minutes if the budget type is time.
• Remain Cost and a value in the local currency if the budget type is costs.
2. Press Y E S to leave this menu.
Your phone can tell you how long your last call was. Your phone can also dis-
play the total time of all external calls made.
Last call
To see the time spent on your last call:
Route: Information » LastCall
1. Select LastCall and press Y E S .
The length of the last call is displayed in hours, minutes and seconds.
2. Press Y E S to leave this menu.
Total external calls made
To see the time spent on all outgoing external calls:
Route: Information » TotalCalls
1. Select TotalCalls and press Y E S .
The total time of all external calls made is displayed in hours, minutes and
seconds.
2. Press Y E S to leave this menu.
The base station records the totals of all external calls made. One of these
totals is costs which is dependent on the call tariff setting and metering pulses.
If you have set the call tariff to zero or no metering pulses are received by the
base station, this menu option is not available. Only the total time can then be
displayed. See also “Call tariff” on page 63.
The maximum amount that can be displayed is either 99:59 or 99999.
CALL STATISTICS HANDSET
CALL STATISTICS BASE STATION
Remain Time
03:45
Remain Cost
00219