Subscribing another type of handset – Ericsson 230 User Manual

Page 70

Advertising
background image

Not

f

or Comm

e

rc

ia

l Use

E

ricsson Mobile

Com

m

unic

a

ti

ons A

B

Extra features

69

PIN code, is secret and prevents other handsets subscribing to the base station

without your approval.

If the handset does not have a subscription, it automatically enters the sub-

scription mode when it is switched on. In this case, the handset displays

Press

<Page> base station

first and then

Enter AC:

appears. If so, you can skip step two

and three of the procedure below.

To subscribe a DT200 handset to the base station:

Route:

Networks » Subscribe

1.

Press the

P A G E

button on the base station for at least two seconds.

2.

Select

Subscribe

and press

Y E S

.

Enter PIN:

,

Enter AC:

or

Subscr. List Full

is displayed. In the latter case, your

handset already has eight subscriptions and to add a new subscription you
have to delete another.

3.

If requested enter the PIN code for the handset (see page 58) and press

Y E S

.

Enter AC:

is displayed.

4.

Enter the authentication (PIN) code of the base station.
Each digit of the AC number that you enter is shown only as

for security

purposes.

5.

Press

Y E S

to confirm.

The handset now looks for base stations in subscription mode using the
AC number to test if it is allowed to subscribe.

6.

Wait until

Subscription Ready

is displayed for a short time.

The handset is connected to the base station. You can see its internal phone
number on the right-hand side of the display.

In case of the following message, try to subscribe again:

Subscription Failed

: the AC number you have entered does not match the base

station PIN code or the base station already has eight handset subscrip-

tions. To add a handset you have to delete the subscription of another

handset.

You can provide a personal identity for the base station. The name is arbitrary

and is shown in the display when the handset is connected to the base station

and on standby. See “Editing base station name” on page 81.

Subscribing another type of handset

Your base station functions can be fully utilized when used in combination

with a DT200 handset. If it is used with another type of handset, there are a

few functions that will not work.

Please refer to the handset documentation for subscribing another type of

handset to the base station. To initiate subscription, you have to press the

Home

2

John

2

Advertising