Grass Valley KMV-3901 Jul 30 2012 - Manual (Page 18)

14 | KMV-3901/3911
Status/Name
This contains an expandable tree listing
all the alarms reported by this KMV-
3901/3911 card.
• Each alarm name includes an
icon that shows its current status.
The Card LED, Overall alarm and GSM
contribution columns contain lists that
allow the level of contribution of each
individual alarm to the alarm named in
the column heading to be set.
• N/A means the alarm is not user-
configurable.
 Card LED
This column allows configuration of
the behavior of the KMV-3901/3911’s
card-edge Status LED.
 Overall alarm
This column allows configuration of
the contribution of each individual
alarm to the Overall Alarm associated
with this card. The Overall Alarm is shown in the upper left corner of the iControl panel, and also appears
at the bottom of the Status/Name column.
 GSM contribution
This column allows configuration of the contribution of each individual alarm to the GSM Alarm Status
associated with this card. GSM is a dynamic register of all iControl system alarms, and is also an alarm
provider for external applications. The possible values for this contribution are related to the Overall alarm
contribution:
• If the Overall alarm contribution is selected as Disabled, the GSM alarm contribution can be set to any
available value.
• If the Overall alarm contribution is selected as any level other than disabled, the GSM contribution is
forced to follow the Overall Alarm.
Levels associated with these alarms
The lists may contain some or all of the following options:
The alarm makes no contribution (black icon)
The alarm is of minor importance (yellow icon)
The alarm is of major importance (orange icon)
The alarm is of critical importance (red icon)
The alarm exists but has no effect (used for text and composite alarms)
Shortcut: Click one of the Set All buttons beside a section heading to open a menu that lets you assign a
level to all alarms in that section of the column simultaneously.
Figure 3.7 Alarm Configuration Panel Figure 3.6 Alarm Configuration Panel