Grass Valley Kaleido-X16 Installation v.7.70 - Manual (Page 26)

14
Kaleido-X16 Installation
External Reference
External Reference
The external reference (REF) input signal allows the Kaleido-X16 to genlock to the local
plant.
Router Outputs
The Kaleido-X16 can be configured as a router. In this configuration, up to two Kaleido-X16
channels are considered as sources, and the destinations are the two RT OUT ports on the
rear connector panel:
For more information about Router Output specifications, see Router Outputs , on page 26.
For more information about Routers and the Kaleido-X16, see the Routers chapter of the
Kaleido-X User’s Manual.
Audio I/O
The Kaleido-X16 supports audio monitoring through its HD-26 connector. The supported
formats are AES3 digital audio, and analog audio. In addition, the Kaleido-X16 supports
audio monitoring through the SDTI input port from an audio bridge terminal (ABT).
Audio I/O TBA
To facilitate cabling through the HD-26 connector, a terminal block adapter (TBA) is
available separately (order code NSH26M).
BNC connector for
Mosaic SDI OUT 2 BNC connector for
Mosaic SDI OUT 1
BNC connector for
External Reference
BNC connectors
for router outputs
HD-26 audio I/O connector
for AES, analog
BNC connector for
External Reference BNC connector
for SDTI input