Introduction, Hardware, Documentation – Grass Valley Krystal Multi-Channel User Manual
Page 3: Tools and materials required for installation
Krystal Multi-Channel Upgrade
1
Installation Instructions
Krystal Multi-Channel Upgrade
Introduction
This document explains how to upgrade a single channel Krystal Video Processor to a
multi-channel Video Processor and install the channel into a multi-channel Krystal
system.
If you purchased a new multi-channel Krystal system, you will not have to upgrade
the hardware. The correct modules will have been installed in the proper locations at
the factory.
Hardware
The Multi-Channel Upgrade kit consists of:
■
One Video Processor I/O Module (#066237)
■
Control cables
Documentation
■
Installation Instructions (this document #071016500)
Tools and Materials Required for Installation
■
Anti-static work surface
■
#15 Torx or straight blade screwdriver
■
The following module from the single channel Video Processor Frame:
■
Effect Manager (#066224-00S or higher).
Note
If your Effect Manager is no revision S or higher, we strongly recommend you
contact Tektronix/Grass Valley Products customer service for an upgrade.
■
Serial Outputs module (#066227-00L or higher). Versions earlier
than revision L are
not
complatible for combining.
Note
If you have incompatible modules, contact Tektronix/Grass Valley Products
customer service for an upgrade.