Grass Valley NV9603A v.1.1 - Manual (Page 27)

17
NV9603A
User’s Guide
Checkbox Options
The checkbox options section is just below the panel options section, enclosed in the same
region:
A check in the box enables the option. Clearing the checkbox disables the option.
By default, all the check box options are clear.
The following items are the checkbox options:
• User-Programmable ID.
Allows the Panel ID to be changed locally at the control panel (in menu mode).
• Source Master Default.
Makes a control-level source the controlling device (or master device) by default. Otherwise,
the destination is the master, by default. (The option is specifically for use with NVISION
series machine control routers.)
“Source is master” is used for duplication, or broadcast routing, on a machine control level.
“Destination is master” is for machine-to-machine editing. If you do not select the “source
master default” option, you can place a ‘Source is Master’ button on the panel.
 Note: a ‘Source is Master’ button is a toggle that reverses the direction of data routing
for devices used in data level (machine control) takes.
• Hide sources not configured on this panel.
Causes the names of source devices that are not presently configured for this particular
panel to be effectively hidden. When another panel changes the source to one not config-
ured for this panel, this panel displays asterisks instead.
• Use continuous scrolling.
If you check this box, the panel will scroll source or destination devices continuously (or
indefinitely). That is, the display will show the first device in the list following the last when
you are scrolling up, and will show the last device after the first if you are scrolling down.
If you leave this box unchecked, the panel will stop scrolling when it reaches either the
beginning or end of the list.
This option does
not affect scrolling of salvos when the panel is in salvo mode or levels when
the panel is in level mode.