Capturing time settings – Grass Valley Pegasus User Manual
Page 40
Advertising
Capturing time settings
Capturing duration and the ending time can be specified/edited. If the
capturing duration is specified, it will be retained as long as the PC is running.
1
Right-click the icon shown at the task tray on the bottom right of the desktop.
2
Choose [Capture Duration] from the menu that is displayed.
3
Specify the ending time of the capture or the capturing duration and click
[OK].
Ending time settings
Free Run
Does not specify an ending time.
Duration
Specifies the capturing duration in the format (HH:
MM:SS. H:Hour, M:Minute, S:Second)
This setting is not cleared, even when capturing
ends.
End Time
Specifies the ending time.
(HH:MM:SS. H:Hour, M:Minute, S:Second)
Advertising