Grass Valley Pegasus - Manual (Page 47)


CHAPTER
1
CHAPTER
2
CHAPTER
3
CHAPTER
4
CHAPTER
5
Contents
Introduction
Setup
Using HQ RECORDER
Settings
Appendix
Gain Control
Adjusts the luminance. Set this to [Manual] to
specify the setting manually. Set this to [Auto] to
automatically adjust the luminance.
Y/C Separation Specifies whether or not 3D Y/C separation is active.
Noise Reduction Specifies the level of noise reduction.
Default The default value is marked with an “*”.
POINT The settings are saved for each input source.
Options that cannot be modified are not available as presets. •
•
Position
Horizontal Adjusts the screen position horizontally.
Vertical Adjusts the screen position vertically.