Grass Valley Profile Mix Effects Upgrad 100 Fibre Channel - Manual (Page 31)

Preparing the Profile System
PDR 100 Fibre Channel Installation 31
1. Use the Torx tool with the T10 tip to remove the top screws and use the T15
tip to remove the side screws, if present, which secure the disk drive cover
Ê
to the chassis and remove the cover.
2. Use the Torx tool with the T10 tip to remove the screws which secure the
board area cover
Ë
.
Figure 8. Profile Top Covers Removal
2
1
9496-1