Grass Valley Profile Composite I/O - Manual (Page 10)

Analog Composite I/O Installation
10 Analog Composite I/O Installation
System Requirements
The Profile System Software installed in the Profile system must be version 2.2 or
higher. To check the software version installed in your Profile system, choose
Help
| About VdrPanel . The software version is listed in the Product Version field in the
displayed window.
Kit Contents
In addition to these instructions, the Analog Composite I/O board kit includes:
• One Analog Composite I/O circuit board
• Two audio clock cables
• One stick-on identification sheet
• One packet of mesh gaskets (used for EMI suppression on BNC connectors)
Tools Required
To install the kit, the following tools are required, but not supplied as part of the
kit:
• Torx screwdriver with T10 and T15 tips
• ESD grounding straps