Grass Valley Profile Composite I/O - Manual (Page 32)

Analog Composite I/O Installation
32 Analog Composite I/O Installation
Audio I/O Audio Clock Cabling
Figure 6 shows an example of an Analog Composite I/O board installation in a
PDR 100 with two Audio I/O boards instead of an ASPB. In the Figure 6, audio clock
cable connections are from:
• Analog Composite I/O Channel A to the RECORD connector on the Audio I/O
board in the lowest numbered slot from slot J5 to slot J15.
• Analog Composite I/O Channel B to the RECORD connector on the Audio I/O
board in the next lowest slot.
• PLAY connectors on both Audio I/O boards to any of the system clocks on the
RefGen board, or to any board which has system clock connectors (such as the
Analog Composite Output board).
Figure 6 is an example only. If you have other video boards installed, you will have
to determine which video source you want to use for the audio clock signals and
make Audio I/o board connection adjustments accordingly.