Grass Valley SMS-6000 Series - Manual (Page 17)

xviii
Safeguards and Notices
Power Cord Notices
North American Power Supply Cords
This equipment is supplied with a molded grounding plug ( NEMA 5-15P )
at one end and a molded grounding receptacle (IEC 320-C13) at the other
end. Conductors are color coded white (neutral), black (line) and green or
green/yellow (ground).
Operation of this equipment at voltages exceeding 130 Vac will require
power supply cords which comply with NEMA configurations.
International Power Supply Cord
This equipment is supplied with a molded grounding receptacle (IEC 320-
C13) at one end and stripped conductors (50/5 mm) at the other end.
Conductors are CEE color coded—light blue (neutral), brown (line) and
green/yellow (ground). Other IEC 320 C-13 type power supply cords can
be used if they comply with the safety regulations of the country in which
they are installed.
White
Green or Green
with Yellow stripe
Black
Line
Neutral
Ground
(Earth)
NOTE: The
illustrated U.S. cord
is for 110/125 Vac
only.
For 220 Vac, the line
cord has two hot
lines and no neutral.
Blue
Green with
Yellow stripe
Brown
Line
Neutral
Ground
(Earth)
NOTE: This
international cord is
for both 110 and 220
Vac.
Europe uses single-
or 3-phase 230 Vac,
with one hot line and
one neutral.