Sync settings, Video output settings, Audio output settings – Grass Valley STORM 3G Elite User Manual
Page 66: Downconvert settings, Point
Section ― Setting Editing Environments
66
STORM 3G ELITE ― Setup Guide
POINT
When you click "Settings" in step 18, the
"Output Video Format" indicator on the
front panel of STORM 3G Elite lights.
When using 10-bit video format, the
"Output 10-bit" indicator lights.
•
19
Click the "Settings" tree and click an item to set.
20
Set each item.
Configure the output setting of STORM 3G Elite.
Click [Apply], and then configure another item.
Sync Settings
Configuring Sync Settings synchronizes the output
device used for printing to tape with STORM 3G Elite.
The setting items are the same as that of "Sync
Settings" in Step 12.
Sync Settings
►P51
Video Output Settings
The settings of an output device used for printing to tape.
The setting items are the same as that of "Video
Output Settings" in Step 12.
Video Output Settings
►P53
Audio Output Settings
The settings of an output device used for printing to tape.
The setting items are the same as that of "Audio
Output Settings" in Step 12.
Audio Output Settings
►P55
Downconvert Settings
The settings of an output device used for printing to tape.
The setting items are the same as that of "Downconvert
Settings" in Step 12.
Downconvert Settings
►P56