Electrolux EWG 14750 W - Manual (Page 9)

control panel electrolux 9
Display (7)
7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8
7.9
7.10 7.11 7.12
The display shows the following
information:
Temperature value
Temperature icons , Cold
During the washing cycle the display
shows the temperature icon animated
to indicate that the appliance has
started the heating phase of the water
in the tub.
Spin speed value
Spin speed icons: No spin ,
Rinse Hold , Night Cycle
During the spinning phase the spiral is
animated.
No spin option eliminates all the spin
phases and increases the number of
rinses for some programmes.
Rinse Hold: by selecting this option
the water of the last rinse is not
emptied out to prevent the fabrics from
creasing. When the programme has
finished the display shows three
blinking
0.00 , the icon is still 7.10
7.4
7.3
7.2
7.1
visualized, the light of button 8 is off
and the door i s locked to indicate that
the water must be emptied out.
To empty out the water, please read
the paragraph «At the end of the
programme».
Night Cycle: by selecting this option,
the machine will not drain the water of
the last rinse, so as not to wrinkle the
laundry.
As all spinning phases are suppressed,
this washing cycle is very quiet and it
can be selected at night or in times
with a more economical power rate.
On
some programmes the rinses will
be performed with more water.
When the programme has fi nished, the
display shows three blinking 0.00 , the
icon is still visualized, the light of
button 8 is off and the door is locked
to indicate that the water must be
emptied out.
To empty out the water, please read
the paragraph «At the end of the
programme».
7.10
132964640.qxd 19/07/2008 12.00 Page 9