Electrolux EWP 86100 W - Manual (Page 15)

1 Programme selector
dial Turn the programme selector dial to the required
programme. The selector dial can be turned either
clockwise or counter-clockwise. The green pilot light
of the button 6 starts flashing: the appliance is now
switched on.
If you turn the programme selector dial to another
programme when the appliance is working, the red
pilot light of the button 6 will flash 3 times to indicate
a wrong selection. The appliance will not perform the
new selected programme.
• To switch the appliance off, turn the programme se-
lector dial to the position .
• To cancel or change a running programme, switch
the appliance off by turning the programme selector
dial to the position
. Select the new programme by
turning the selector to the desired programme. Start
the new programme by pressing the button 6 again.
The water in the tub will be not emptied out.
2 Temperature button Push the temperature button to select the most
suitable temperature for washing your laundry .
: Cold wash.
3 Spin reduction and
Rinse Hold By selecting a programme, the appliance proposes auto-
matically the maximum spin speed provided for that pro-
gramme.
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a different speed.
The relevant light illuminates.
Rinse Hold
By selecting this function the water of the last rinse is not
emptied out to prevent the fabrics from creasing. Before
opening the door it will be necessary to empty out the
water.
To empty out the water, please read the paragraph
«At the end of the programme».
4 Super Quick By pressing this button the corresponding pilot light illu-
minates.
Short cycle for lightly soiled items or for laundry which
needs only freshening up.
With this option, a reduced load of laundry is recommen-
ded:
• Cottons 3 kg
• Synthetics and delicates 1,5 kg
electrolux 15