Polaris 2001 Victory Standard Cruiser - Manual (Page 70)

63
MAINTENANCE
Headlight Adjustment
1. First inspect tire pressures. Correct if necessary.
2. Select a level area with low lighting and enough room to place
the motorcycle’s front tire 25 feet from the wall or temporary
screen.
3. Measure from the center of the headlight to the floor. Draw a
horizontal line on the wall or screen that equals this
measurement.
4. Have someone who is approximately the same weight as the
primary rider sit on the motorcycle.
5. Place the motorcycle upright with the handlebars centered and
turn on the high beam of the headlight.
6. The top of the light beam must be even or below the horizontal
line on the wall or screen.
7. The light beam should project evenly to the right and left of the
motorcycle’s center line.
8. Remove the headlamp bezel ring.
9. If headlight ad-
justment is
necessary, turn
the headlight
aiming screws
(1) in or out as
needed.
7.62 M
(25 feet)
1