Maintenance, Hydraulic cylinder disassembly and assembly – Polaris 2013 BRUTUS Accessory Snow Blade User Manual
Page 40
Advertising
39
MAINTENANCE
Hydraulic Cylinder Disassembly And Assembly
Assembly (Cont’d)
9. Install the piston on the rod.
10. Install the nut on the rod. Tighten the nut to 250 ft.-lbs. (339
Nm) torque.
11. Apply clean hydraulic oil to the inside of the cylinder case.
12. Apply clean hydraulic oil to the outer diameter of the piston.
Advertising
This manual is related to the following products: