Maintenance, Hydraulic cylinder disassembly and assembly – Polaris 2013 BRUTUS Accessory Snow Blade User Manual
Page 41
Advertising
40
MAINTENANCE
Hydraulic Cylinder Disassembly And Assembly
Assembly (Cont’d)
13. Install the rod into the cylinder case.
14. Apply clean hydraulic oil to the threads of the cylinder case
and to the outer diameter of the head.
15. Install the head into the cylinder case. Use the adjustable
gland nut wrench to tighten the head. Tighten the nut to 200
ft.-lbs. (271 Nm) torque.
Advertising
This manual is related to the following products: