Polaris 2015 Polaris M1400 - Manual (Page 72)

70
MAINTENANCE
Tires
Operating your vehicle with worn tires, improperly inflated tires, non-standard tires or improperly
installed tires will affect vehicle handling and could cause an accident resulting in serious injury or
death. Always follow all tire maintenance procedures as outlined in this manual and on the labels on
the vehicle. Always use POLARIS-approved size and type of tires for this vehicle when replacing tires.
Tire Tread Depth
Always replace tires when tread depth is
worn to 1/8” (3 mm) or less.
Axle and Wheel Nut Torque
Specifications
Inspect the following items occasionally for tightness, and if they've been loosened for
maintenance service. Do not lubricate the stud or the lug nut.
Wheel Removal
1. Apply the brakes. Place the transmission in PARK. Turn the key off.
2. Loosen the wheel nuts slightly.
3. Elevate the side of the vehicle by placing a suitable stand under the frame.
4. Remove the wheel nuts and washers. Remove the wheel.
Nut Type Location Nut Torque
Wheel Nut Front and Rear 65 ft. lbs. (88 Nm)
Spindle Nut Front 75 ft. lbs. (102 Nm)
Hub Retaining Nuts Rear 110 ft. lbs. (150 Nm)
WARNING
1/8" (3 mm)