HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 145)

4-20
TNC 407/TNC 415/TNC 425 1 Machine axes 01.98
Marker Function Set Reset
M2012 Lubrication pulse X axis, since value of MP4060.0 NC NC
was exceeded
M2013 Lubrication pulse Y axis, since value of MP4060.1
was exceeded
M2014 Lubrication pulse Z axis, since value of MP4060.2
was exceeded
M2015 Lubrication pulse 4th axis, since value of MP4060.3
was exceeded
M2029 Lubrication pulse 5th axis, since value of MP4060.4
was exceeded
M2548 Reset of accumulated distance for PLC PLC
lubrication X axis
M2549 Reset of accumulated distance for
lubrication Y axis
M2550 Reset of accumulated distance for
lubrication Z axis
M2551 Reset of accumulated distance for
lubrication 4th axis
M2613 Reset of accumulated distance for
lubrication 5th axis