HEIDENHAIN ND 231 B v.2 - Manual (Page 51)

51
Remote
O
peration
over
the
R
S-232-C/V.24
Data
Interface
Remote Operation over the RS-232-C/V.24 Interface
You can operate the display unit remotely over the RS-232-C/
V.24 data interface. The following commands are available on
the ND 231 B:
Format:
<ESC>TXXXX<CR> Pressed key
<ESC>AXXXX<CR> Output of screen contents
<ESC>FXXXX<CR> Execute function
<ESC>SXXXX<CR> Special function
Sequence of commands Meaning
<ESC>T0000<CR> ‘0‘ key
<ESC>T0001<CR> ‘1‘ key
<ESC>T0002<CR> ‘2‘ key
<ESC>T0003<CR> ‘3‘ key
<ESC>T0004<CR> ‘4‘ key
<ESC>T0005<CR> ‘5‘ key
<ESC>T0006<CR> ‘6‘ key
<ESC>T0007<CR> ‘7‘ key
<ESC>T0008<CR> ‘8‘ key
<ESC>T0009<CR> ‘9‘ key
<ESC>T0100<CR> ‘CL‘ key
<ESC>T0101<CR> ‘-‘ key
<ESC>T0102<CR> ‘.‘ key
<ESC>T0104<CR> ‘ENT‘ key
<ESC>T0105<CR> ‘MOD‘ key
<ESC>T0107<CR> ‘1/2‘ (datum) key
Sequence of commands Meaning
<ESC>T1000<CR> ‘CE+0‘ keys
<ESC>T1001<CR> ‘CE+1‘ keys
<ESC>T1002<CR> ‘CE+2‘ keys
<ESC>T1003<CR> ‘CE+3‘ keys
<ESC>T1004<CR> ‘CE+4‘ keys
<ESC>T1005<CR> ‘CE+5‘ keys
<ESC>T1006<CR> ‘CE+6‘ keys
<ESC>T1007<CR> ‘CE+7‘ keys
<ESC>T1008<CR> ‘CE+8‘ keys
<ESC>T1009<CR> ‘CE+9‘ keys
<ESC>A0000<CR> Output of model designation
<ESC>A0100<CR> Output of 14-segment display
<ESC>A0200<CR> Output of current value
<ESC>A0301<CR> Output of error text
<ESC>A0400<CR> Output of software number
<ESC>A0900<CR> Output of status indicators
<ESC>F0000<CR> REF function
<ESC>F0002<CR> Print
<ESC>S0000<CR> Counter RESET
<ESC>S0001<CR> Lock keypad
<ESC>S0002<CR> Release keypad