HEIDENHAIN TNC 128 (77184x-01) - Manual (Page 213)

HEIDENHAIN TNC 128 213
8.8 A
d
ditional functions
FN 29: PLC: Transfer values to the PLC
The function FN 29: PLC transfers up to eight numerical values or Q
parameters to the PLC.
Increments and units: 0.1 µm or 0.0001°
Example: Transfer the numerical value 10 (which means 1 µm or
0.001°) to the PLC
56 FN 29: PLC=+10/+Q3/+Q8/+7/+1/+Q5/+Q2/+15