Exide Technologies Industrial Battery Charger S47-0079 - Manual (Page 20)

DWG. NO. WIRING DIAGRAM:
DR.
DATE: CHK:
12 11 10 9 8 7 6 5 4 3 2 1
2
CMP
3 PHASE, 4 TRANS,
4 GANG, STANDARD CONFIGURATION.
(C1,C2,C3 AND C4) TYPICAL CIRCUIT
02-490
02-490
NOTES:
* WATERING NOT AVAILABLE ON ALL CONTROLS.
1
2
3
RESISTOR OPTIONAL
DISCONNECT OPTIONAL
WATER VALVE OPTIONAL
FAN AND FILTER OPTIONAL
SHOWN IN HIGH VOLTAGE SETTING
OUTPUT TAP ADJUSTMENT
MODELS WITH DUAL VOLTAGE PRIMARY'S
WILL ONLY HAVE 1,5 AND 6 TAPS
MODELS THAT HAVE A SET VOLTAGE
WILL ONLY HAVE 1 AND 6 TAPS
MODELS THAT HAVE DUAL VOLTAGE OR
SET VOLTAGE MAY HAVE A SET VOLTAGE
CONTROL TRANSFORMER
4
5
6
7
8
9
10 TRANSFORMER THERMAL OVERLOAD
REV. DESCRIPTION DATE
D REMOVED THERMAL OVERLOAD
11 DRY FORM "C" RELAY - OPTIONAL
# DENOTES POSITION ON 4 POLE TERMINAL BLOCK
01/08/98
01/08/05