Exergen Transmitter IRt/c.XMTR - Manual (Page 3)

C O R P O R A T I O N
5 0 5 0 5 0 5 0 5 0
51 Water Street, Watertown, MA 02172 USA
800-422-3006 • 617-923-9900 • Fax 617-923-9911
IRt/c Accessories
CJK-1
Cooling Jacket Kits
A convenient and inexpensive kit makes it possible
to use the IRt/c with air, water, or both for service in
harsh environments. Measuring only 1" x 4.16" (25 x
106 mm) overall, the CJK-1 is physically small
enough to fit into tight areas and closely monitor
process temperatures from the optimum position - up
close. With its all stainless steel housing, it can
withstand the harshest environments.
Extraordinarily efficient in design, the CJK requires
only .05 gpm (190 cc/min) of water and 0.1 CFM
(3000 cc/min) of air to protect an IRt/c at 1000
°
F
(540
°
C).
Features
•
Small size - 1" dia. x 4.16" lg. (25 x 106mm)
•
Stainless steel housing
•
Seamless copper monotube cooling coil
•
Complete equipment for air cooling and/or
water cooling
•
Air purge included
•
Super-efficient design for low air and water use
•
Fits IRt/c, IRt/c.1X, IRt/c.3X
•
Water cooling to 1000°F (540°C) with as little
as 0.05 gpm (190 cc/min) and 0.1 CFM (3000
cc/min) of air
Water Coil IRt/c.2
All Stainless Steel Housing
Spring
Water In
Water Out
Purge Air In
Purge Air Out
1/8" (3,2) Tubing
Female Run Tee
Male Connector
Thermocouple Wire
Reducing Union
1/4 to 1/8
Water Cooling Configuration.
All fittings required are supplied.
Water flow > .05 gpm (190 cc/min).
The water
cooling system
consists of a
seamless monotube, in order
to eliminate the possibility of
leaking joints. For convenience, the
seamless tubing extends 3 ft (1 m) from
the rear of the housing.
CJK-1 Housing Dimensions
.372 (9,44)
.75 (19,05)
10-32 Tapped Holes - 2
1/8 NPT
.22 (5,56)
.500 (12,7)
.44 (11,1)
4.16 (105,6)
.595 (15,1)
1.00 (25,4) O.D.
6-32 Tapped Holes -4
for IRt/c, IRt/c.3X, IRt/c.1X
Water/Air Cooling
CJK-1