ShoreLand'r SLXR40TCBXLW User Manual
Page 7
Advertising
Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028
www.shorelandr.com
0004281
Page
7
of
16
10/28/2010
XR SERIES
The R-series roller rack is installed by placing the
roller arm assembly mounting channel over the
rear cross member and securing in place with a
1/2” x 4-1/2” hex bolt and lock nut. (See Diagram
A). Note that it should be left loose until the boat is
placed on the trailer. Once the proper position has
been determined, it may be tightened. Repeat on
the other roller arm assembly.
Advertising