Section 2 installation, 1 general, 1 scope of instructions – EFJohnson 001-9800-001 User Manual
Page 14: 2 performance tests, Installation, General, Scope of instructions -1 performance tests -1, Front mount installation components -1
2-1
February 2001
Part No. 001-9800-001
INSTALLATION
Figure 2-1 Front Mount Installation Components
Item
No.
Description
Part No.
Item
No.
Description
Part No.
1
Amplified dynamic microphone
250-0740-300
7
Screw, No. 10 self-drilling (4)
575-9077-545
2
Tri-knob (2)
547-0016-008
8
10-ft. DC power cable & hardware 023-9800-410
3
Standard mounting bracket
017-2229-005
9
Accessory pigtail cable (optional) 597-9800-003
4
Microphone hanger
023-3514-001
10
Accessory wire kit (optional)
023-9750-011
5
Screw, 4-24 x 5/16” sheet metal (3) 575-3604-010
11
5”, 4.7 ohm external spkr (optional) 250-0151-010
6
Hanger grounding wire assembly
023-7171-911
Miniature UHF
Jack
1
2
2
3
4
5
6
7
8
11
10
Antenna
10 ft
Install
15A Fuse
Optional
Speaker
Optional
9
6 ft
2.1 GENERAL
2.1.1 SCOPE OF INSTRUCTIONS
Since each installation is somewhat unique, the
installation instructions which follow are intended
only as a general guide to installing this transceiver.
2.1.2 PERFORMANCE TESTS
Although each transceiver is carefully tested and
aligned at the factory, it is good practice to verify
transceiver performance before it is placed in service.
Performance tests are located in Sections 7.5 and 7.6.
SECTION 2 INSTALLATION