Emerson PD6870CH - Manual (Page 7)

6
SETTING THE CLOCK
With the power off, press and
release the PROGRAM/
MEMORY/CLOCK SET button;
“24H” or “12H” will blink in the
display.
1
Press the CD Skip/Search ( )
❶ or ( ) ❷ button to set the
current minute.
1
2
4
Press the CD Skip/Search ( )
❶ or ( ) ❷ button to set the
current hour, then press the
PROGRAM/MEMORY/CLOCK
SET button
❸ again; the minute
digits will blink.
1 3
2
3
Press the CD Skip/Search ( ) ❶
or ( ) ❷ button to select the 12
hour or 24 hour mode (see note
below), then press the PROGRAM/
MEMORY/CLOCK SET button
❸
again; the hour digits will blink.
1 3
2
2
Press the PROGRAM/
MEMORY/CLOCK SET button
and the time will be set.
5
SETTING THE CLOCK
With the power on, press the
LIGHT button to temporarily
illuminate the display.
1
LIGHT BUTTON
NOTE: In the 12 hour mode the
display will show AM and PM
indicators. In the 24 hour mode
there are no AM or PM indicators.
“1:00PM” is displayed as “13:00”,
“6:00PM” is displayed as “18:00”
and 12 midnight is displayed as
“0:00”. The 12 hour mode is used
in the USA and Canada. The 24
hour mode is used in Europe, Asia
and other countries.