Emerson SB351 - Manual (Page 18)

17
OUTDOOR VHF/UHF ANTENNA CONNECTION (Antenna not included)
OUTDOOR ANTENNA CONNECTIONS
Follow the instructions for the type of antenna system you intend to use. If using Cable or Satellite, see page 16.
Separate VHF/UHF Antennas
Connect the 75 ohm cable from
combination VHF/UHF antenna to the
antenna jack.
OR
If your combination antenna has a 300
ohm twin-lead wire, use a 300-75 ohm
matching transformer (NOT SUPPLIED).
Connect the UHF twin-lead wire to a
combiner (NOT SUPPLIED) . Connect
the VHF twin-lead to a 300-75 ohm
matching transformer (NOT
SUPPLIED) . Attach the transformer to
the combiner. Attach the combiner to
the antenna jack.
Connect the 75 ohm cable from the
VHF antenna and the UHF antenna
twin-lead wire to a combiner (NOT
SUPPLIED) . Attach the combiner to
the antenna jack.
NOTE: If your VHF antenna has a
twinlead wire use a 300-75
ohm matching transformer,
then connect the transformer
to the combiner.
Combination VHF/UHF
Antenna (Separate VHF and
UHF 300 ohm twin-leads)
Combination VHF/UHF
Antenna (Single 75 ohm cable
or 300 ohm twin-lead wire)