Emerson SB351 - Manual (Page 22)

21
BASIC TV OPERATION
Set the AIR/CATV Menu Option as described on page 18. Press the Power button to turn
on the TV.
OPTIONS
AIR: If using a VHF/UHF
antenna.
CATV: If using Cable TV.
Adjust the volume level by pressing the VOLUME
UP/DOWN button.
For proper operation, before selecting channels,
they must be set into the TV’s program memory, see
page 19.
Press and release the CHANNEL UP/DOWN button .
The TV automatically stops at the next channel set into
memory.
This will not operate if channels are not set into memory.
Direct Program Selection buttons (0-9)
Use these buttons to select a channel. The channel
number will appear at the top right corner of the screen.
• For Channels 1 through 9, press 1-9 as desired.
• For Channels 10 through 99, press the “- --” button
once, then the two digits in order.
• For Channels 100 through 125 (CATV only), press the “-
--” button twice, then the three digits in order.
FAQs:
AIR/CATV option must be set to CATV when using cable, see page 18.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.
NOTES:
• When AIR/CATV option is set to AIR, only channels
up to 69 can be selected. When set to CATV,
channels up to 125 can be selected.
• If an invalid channel is selected, the display will
revert to the original channel.
1
2
2
1 2
3 4
1
2
2