Yaskawa MP2000iec User Manual
Page 18
Advertising
Subject: Example Code Manual
Product: MP2000iec
Doc#: EM.MCD.09.095
Title: Example Code Manual for Linear Flying Shear on MP2300Siec Sigma-5 Demo using camming
July 13, 2009
Page 18 of 21
Figure 18: Logic to decide on cam disengage
Figure 18 shows the logic to determine if a cam out needs to be executed. A cam out is executed if no part is
detected within the window of an existing cam cycle. If no part is detected, a cam out is issued and a shift back is
commanded such that there is no phase shift in the master’s position after the cam out is done. This is shown in
Figure 19.
Advertising