Enterasys Networks ROAMABOUT RBT-1602 User Manual
Page 37
Lightning Protector Installation
RoamAbout Antenna Site Preparation and Installation Guide 3-5
To install the RoamAbout Lightning Protector, perform the following steps:
1.
Determine a suitable location for the Lightning Protector as described in
.
2.
Use lock washer and hex nut to secure ring‐terminal to the longer of the threaded ends of the
Lightning Protector.
3.
Connect ground‐wire to ring terminal.
4.
Connect the longer threaded end of the protector to a Reverse‐N Female cable connected to a
RoamAbout Access Point.
5.
Connect the shorter threaded end of the protector to a Reverse‐N Female cable connected to
the antenna.
Caution: To avoid damage to the RoamAbout equipment, always install the RoamAbout Lightning
Protector between the outdoor antenna installation and the RoamAbout AP or other computing
device connected to the outdoor antenna.
Precaución: para evitar daños a los equipos RoamAbout, debe asegurarse de instalar el
pararrayos RoamAbout Lightning Protector entre la antena para exteriores y el RoamAbout AP o
cualquier otro dispositivo electrónico conectado a la antena.
Achtung: Zum Schutz der RoamAbout-Ausrüstung ist der RoamAbout-Blitzableiter zwischen der
Außenantenne und dem RoamAbout AP oder sonstigen an die Antenne angeschlossenen
Computergeräten zu installieren.