Enterasys Networks ROAMABOUT RBT-1602 User Manual
Page 55
Mounting the Antenna
RoamAbout Antenna Site Preparation and Installation Guide 3-23
3.
Obtain the proper screws to secure the antenna bracket to this wall surface.
Attaching the Antenna Bracket to the Antenna
illustrates how to attach the antenna bracket to the 5.8 GHz panel antenna.
lists the components for this procedure.
Figure 3-11 Attaching Antenna Bracket to RoamAbout 5.8 GHz Panel Antenna
To attach the antenna bracket to the antenna, perform the following steps:
1.
Place the antenna so that the side with screw holes is facing up.
2.
Use the polarization label on the upper left corner of the antenna to orient the antenna with
the correct polarization.
Note: This antenna does not ship with screws for attaching the antenna bracket to a wall.
Table 3-10 RoamAbout 5.8 GHz Panel Antenna Bracket Mounting Components
#
Component
1
Antenna bracket
2
Antenna (RBTES-AH-P23M)
3
Screw holes to attach bracket to antenna
4
Screws to attach bracket to antenna
5
Label showing direction of antenna vertical polarization
3
1
4
5
2