Yaskawa MPLoad Maker - Manual (Page 24)

5 Creating .BAT File Executable from HDD
5.2 Creating .BAT File
24
Click the OK Button to complete the settings. The Transmission file selection Dialog Box will be displayed
again.
The selected logical port number and the contents assigned to the port are displayed in the Communication
port column.
9. Repeat Steps 3 through 8 to set all the applications to be transferred and the transfer destinations.
ΠAlso repeat Steps 3 through 8 (file selection to communications port settings) when setting one application to
multiple transfer destinations.
ΠDo not close the Transmission file selection Dialog Box until the application selection and communications
port settings have been completed and the .BAT file has been created by clicking the Execution Button. Clos-
ing the Dialog Box before clicking the Execution Button will delete all the information set for the application.
10.
When you have finished selecting all of the applications to be transferred and completed all communi-
cations port settings, click the Execution Button.
Œ When the Show Option is selected under Please select ‘show’ or ‘hide’ of confirmation dialog, the
Confirmation Dialog Box will be displayed when the .BAT file is opened in the Target PC to check the transfer
file names and communications port settings.
ΠIf the auto start .BAT file is forcibly terminated by Windows Task Manager or the Target PC power supply is
turned OFF in the Target PC where the MPE720 is installed, the MPE720 may not be able to run any more.
When the Yes Option is selected under If the transfering has forced termination for no apparent reason,
do you want to make it automatic recovery?, a backup file will be created to restore the original environ-
ments so that the MPE720 will start properly in the above case.