Irritrol Junior MAX - Manual (Page 8)

Program position: % SCALING (Seasonal adjust)
In this program position, you can increase or decrease the RUN TIMES of all stations in a
program by percentage scaling from 0% (program OFF) to 200% in 10% increments.
Press PROG to select the program you wish to % scale.
Press +/ON or -/OFF to change adjustment from 100%
The initial RUN TIME set represents 100%. Scaling increases or decreases this initial run
time. The new adjusted run time will be displayed whenever the program is operating.
The “%” icon will also be displayed whenever that program is operating or being
reviewed to alert you that the run time has been adjusted from the initial setting.
To set a program to "OFF"
If you wish to stop irrigation of a program, set percentage scaling to 0%.
The display will show that program is OFF.
To resume normal operation of that program, advance to "% SCALING" and increase the
percentage to your desired value. Increasing to 100% will set RUN TIME to its original
value.
Press PROG to select the program.
Press NEXT to advance to MANUAL.
Program position: MANUAL
In this MANUAL mode, you can set RUN TIME for each of the stations you wish to start
manually. Stations will start in sequence.
Press +/ON or -/OFF to set the station RUN TIME.
Press to advance to next station.
To turn ON the 1st station in the sequence:
Press NEXT to AUTO-RUN position.
Press -/OFF (in AUTO-RUN position) to turn OFF the sequence.
All stations with RUN TIME will be displayed. Operating stations will flash and the
display will show the remaining RUN TIME of the station (count down).
Press NEXT to advance to SEMI-AUTO.
8