Lanner LEC-7230 - Manual (Page 12)

12
Board Layout
Chapter 3
Embedded and Industrial Computing
Connectors and Jumpers List
The tables below list the function of each of the board
jumpers and connectors by labels shown in the above
section. The next section in this chapter gives pin
definitions and instructions on setting jumpers.
Table 3.1 Connector List for LEB-7230 Board
Labels Function Pin Definition Refer-
ence Page
CF1 CompactFlash Connector P15
COM1/COM2 RS232 Serial Ports COM1 and COM2 P13
DIO1 Digital Input/Output P15
HDMI1 High-Definition Multimedia Interface Port P14
JCMOS1 Clear CMOS Jumper P14
JCOM1/2 RS232 Pin Headers P13
JKBMS1 PS/2 Keyboard & Mouse Connector P15
JLPC1 Low-pin Count Interface Reserved for Factory Use
JRI1/2 COM1/COM2 Pin 9 Signal Selection P13
JSPI1 SPI ROM Interface (for debug use only) Reserved for Factory Use
MPCIE1 Mini-PCIe Connectors (with SIM1) P15
PSBTN2 Power Button with Phoenix Connector P15
SATA1 Serial-ATA Connector (SATA1) P14
SATAPWR1 SATA HDD Power Connector P14
SIM1 SIM Card Reader P15
USB1 USB 2.0 Type A Dual Port P14
USB2 USB 3.0 Type A Port P14
VGA1 VGA Connector P14